Park, J. et al. Managed development of perovskite layers with risky alkylammonium chlorides. Nature 616, 724–730 (2023).
Hui, W. et al. Stabilizing black-phase formamidinium perovskite formation at room temperature and excessive humidity. Science 371, 1359–1364 (2021).
Chen, H. et al. Improved cost extraction in inverted perovskite photo voltaic cells with dual-site-binding ligands. Science 384, 189–193 (2024).
Li, X. et al. Establishing heterojunctions by floor sulfidation for environment friendly inverted perovskite photo voltaic cells. Science 375, 434–437 (2022).
Jiang, Q. et al. Floor response for environment friendly and secure inverted perovskite photo voltaic cells. Nature 611, 278–283 (2022).
Chen, R. et al. Discount of bulk and floor defects in inverted methylammonium- and bromide-free formamidinium perovskite photo voltaic cells. Nat. Vitality 8, 839–849 (2023).
Hou, T. et al. Methylammonium‐free ink for low‐temperature crystallization of α‐FAPbI3 perovskite. Adv. Vitality Mater. 14, 2400932 (2024).
Jeong, J. et al. Pseudo-halide anion engineering for α-FAPbI3 perovskite photo voltaic cells. Nature 592, 381–385 (2021).
Kim, M. et al. Methylammonium chloride induces intermediate section stabilization for environment friendly perovskite photo voltaic cells. Joule 3, 2179–2192 (2019).
Niu, T. et al. Part-pure α-FAPbI3 perovskite photo voltaic cells by way of activating lead-iodine frameworks. Adv. Mater. 36, e2309171 (2023).
Chao, L. et al. Direct and secure α-phase formation by way of ionic liquid solvation for formamidinium-based perovskite photo voltaic cells. Joule 6, 2203–2217 (2022).
Liu, C., Cheng, Y. B. & Ge, Z. Understanding of perovskite crystal development and movie formation in scalable deposition processes. Chem. Soc. Rev. 49, 1653–1687 (2020).
Castro-Mendez, A. F. et al. Tailoring interface energies by way of phosphonic acids to develop and stabilize cubic FAPbI3 deposited by thermal evaporation. J. Am. Chem. Soc. 14, 18459–18469 (2024).
Sidhik, S. et al. Two-dimensional perovskite templates for sturdy, environment friendly formamidinium perovskite photo voltaic cells. Science 384, 1227–1235 (2024).
Bai, Y. et al. Initializing movie homogeneity to retard section segregation for secure perovskite photo voltaic cells. Science 378, 747–754 (2022).
Liang, Z. et al. Homogenizing out-of-plane cation composition in perovskite photo voltaic cells. Nature 624, 557–563 (2023).
Chen, H. et al. Quantum-size-tuned heterostructures allow environment friendly and secure inverted perovskite photo voltaic cells. Nat. Photon. 16, 352–358 (2022).
Jiang, Q. et al. Floor passivation of perovskite movie for environment friendly photo voltaic cells. Nat. Photon. 13, 460–466 (2019).
Chen, S. et al. Stabilizing perovskite-substrate interfaces for high-performance perovskite modules. Science 373, 902–907 (2021).
Bu, T. et al. Lead halide–templated crystallization of methylamine-free perovskite for environment friendly photovoltaic modules. Science 372, 1327–1332 (2021).
Lu, H. et al. Vapor-assisted deposition of extremely environment friendly, secure black-phase FAPbI3 perovskite photo voltaic cells. Science 370, eabb8985 (2020).
Xu, Z. et al. Lowering vitality barrier of δ-to-α section transition for printed formamidinium lead iodide photovoltaic units. Nano Vitality 91, 106658 (2022).
Huang, X. et al. Solvent gaming chemistry to regulate the standard of halide perovskite skinny movies for photovoltaics. ACS Cent. Sci. 8, 1008–1016 (2022).
Huang, Z. et al. Anion-π interactions suppress section impurities in FAPbI3 photo voltaic cells. Nature 623, 531–537 (2023).
Solar, N. et al. Tailoring crystallization dynamics of CsPbI3 for scalable manufacturing of environment friendly inorganic perovskite photo voltaic cells. Adv. Funct. Mater. 34, 2309894 (2023).
Xu, J. et al. Anion optimization for bifunctional floor passivation in perovskite photo voltaic cells. Nat. Mater. 22, 1507–1514 (2023).
Li, C. et al. Rational design of Lewis base molecules for secure and environment friendly inverted perovskite photo voltaic cells. Science 379, 690–694 (2023).
Fu, S. et al. Environment friendly passivation with lead pyridine‐2‐carboxylic for top‐efficiency and secure perovskite photo voltaic cells. Adv. Vitality Mater. 9, 1901852 (2019).
Azmi, R. et al. Double-side 2-dimensional/three-d heterojunctions for inverted perovskite photo voltaic cells. Nature 628, 93–98 (2024).
Peng, W. et al. Lowering nonradiative recombination in perovskite photo voltaic cells with a porous insulator contact. Science 379, 683–690 (2023).
Zhang, S. et al. Minimizing buried interfacial defects for environment friendly inverted perovskite photo voltaic cells. Science 380, 404–409 (2023).
Wang, M. et al. Ammonium cations with excessive pOka in perovskite photo voltaic cells for improved high-temperature photostability. Nat. Vitality 8, 1229–1239 (2023).
Du, X. et al. Synergistic crystallization and passivation by a single molecular additive for high-performance perovskite photo voltaic cells. Adv. Mater. 34, e2204098 (2022).
Zheng, Y. et al. Twin‐interface modification for inverted methylammonium‐free perovskite photo voltaic cells of 25.35% effectivity with balanced crystallization. Adv. Vitality Mater. 14, 2304486 (2024).
Chen, T. et al. Entropy-driven structural transition and kinetic trapping in formamidinium lead iodide perovskite. Sci. Adv. 2, e1601650 (2016).
Kim, H. S. et al. Vacuum-assisted reforming cathode interlayer orientation for environment friendly and secure perovskite photo voltaic cells. Nano Vitality 125, 109584 (2024).
Chen, P. et al. Multifunctional ytterbium oxide buffer for perovskite photo voltaic cells. Nature 625, 516–522 (2024).
Duan, T. et al. Chiral-structured heterointerfaces allow sturdy perovskite photo voltaic cells. Science 384, 878–884 (2024).
Li, Z. et al. Organometallic-functionalized interfaces for extremely environment friendly inverted perovskite photo voltaic cells. Science 376, 416–420 (2022).
Wang, M., Fei, C., Uddin, M. A. & Huang, J. Affect of voids on the thermal and light-weight stability of perovskite photo voltaic cells. Sci. Adv. 8, eabo5977 (2022).
Fu, S. et al. Suppressed deprotonation allows a sturdy buried interface in tin-lead perovskite for all-perovskite tandem photo voltaic cells. Joule 8, 2220–2237 (2024).
Zhong, L. et al. Stable additive delicately controls morphology formation and allows excessive‐efficiency in natural photo voltaic cells. Adv. Funct. Mater. 33, 202305450 (2023).
Park, J. et al. Triadic halobenzene processing additive mixed benefits of each solvent and stable sorts for environment friendly and secure natural photo voltaic cells. Small 20, e2405415 (2024).
He, R. et al. Bettering interface high quality for 1-cm2 all-perovskite tandem photo voltaic cells. Nature 618, 80–86 (2023).
Wu, X. et al. Spine engineering allows extremely environment friendly polymer hole-transporting supplies for inverted perovskite photo voltaic cells. Adv. Mater. 35, e2208431 (2023).
Yang, W. et al. Unlocking voltage potentials of combined‐halide perovskite photo voltaic cells by way of section segregation suppression. Adv. Funct. Mater. 32, 2110698 (2021).
Liang, C. et al. Two-dimensional Ruddlesden–Popper layered perovskite photo voltaic cells primarily based on phase-pure skinny movies. Nat. Vitality 6, 38–45 (2020).
Kresse, G. & Furthmüller, J. Eficient iterative schemes for ab initio total-energy calculations utilizing a plane-wave foundation set. Phys. Rev. B 54, 11169–11186 (1996).
Perdew, J. P., Burke, Ok. & Ernzerhof, M. Generalized gradient approximation made easy. Phys. Rev. Lett. 77, 3865–3868 (1996).
Grimme, S. et al. A constant and correct ab initio parametrization of density practical dispersion correction (DFT-D) for the 94 parts H-Pu. J. Chem. Phys. 132, 154104 (2010).