Assessment: BetaFPV Pavo20 Professional with DJI O4 Professional – Any Totally different from O3 and NightFire Editions?

11

After testing totally different variations of the BetaFPV Pavo20 Professional—together with the DJI O3, NightFire version, and now the DJI O4 Professional—I can confidently say: they’re just about the identical. However when you’re questioning which model to decide on or how the O4 improve modifications issues, right here’s the whole lot I’ve discovered.

New to FPV? Begin with our Cinewhoop Purchaser’s Information: https://oscarliang.com/cinewhoop/

The place to Purchase

You may get the Pavo20 Professional O4 version from the next distributors:

Included Equipment:

• 1 × LED Strip Accent Equipment (Ice Blue)
• 4 × Spare Propellers
• 1 × USB-C Adapter Cable
• 1 × Spare DJI O4 Professional Air Unit 6-pin Cable

Word that battery is just not included, get some Lava 3S 550mAh LiPo right here: https://oscarliang.com/product-vrfd

Get some spare 2.2inch propellers right here: https://oscarliang.com/product-8nfq

Specs

In case you’re accustomed to the earlier Pavo20 Professional with O3, the brand new O4 Professional model is actually equivalent by way of core {hardware}:

Design and Construct: O4 vs O3 vs NightFire

Let’s get this out of the best way: the pusher-style body, motors, flight controller, and props are all the identical throughout all these variations of the Pavo20 Professional.

The primary distinction is the brand new digicam cage, designed particularly for the DJI O4 Professional Air Unit. It’s a glossy, injection-molded mount that provides higher antenna routing, and general aesthetics. In comparison with the O3’s mount, the O4 cage appears to be like cleaner and feels extra refined.

Surprisingly, the O4 model is barely lighter than the O3, regardless of utilizing the inventory DJI O4 antennas. It’s because the O4 Air Unit is lighter than the O3, although the burden distinction is minimal and doesn’t noticeably have an effect on flight efficiency.

Utilizing Authentic O4 Professional Antennas

One small gripe: I want BetaFPV included shorter dipole antennas, like they did with the O3 model. They’re not solely lighter, but additionally extra sturdy in crashes. The inventory O4 antennas are solely press-fitted into the mount, which means they’ll simply come out throughout a crash and presumably harm the delicate U.FL connectors and wire.

In case you’re involved about sturdiness:

• Contemplate gluing the antennas into place.
• Or higher but, swap them for dipoles to avoid wasting ~4g and cut back threat.

Sure, you would argue that the inventory antennas supply higher vary—however the actual limiting issue right here is the ELRS receiver antenna that’s buried below the FC, not the video system. And because the Pavo20 Professional lacks GPS, you don’t actually wish to fly it far anyway. Because of this, dipoles must be high quality.

Area of View and Prop Guard

You may discover the prop guard showing within the backside corners of your goggles. That is because of the extremely vast discipline of view (FOV) of the O4 Professional digicam, particularly when you find yourself in 4:3 mode. Nevertheless, when you run the footage via Gyroflow for stabilization, these prop guards often get cropped out, so it’s not a significant concern.

Battery Mounting and Payload

The drone makes use of a normal battery strap, supplying you with flexibility to make use of numerous 3S LiPo sizes, together with 3S 450mAh, 550mAh and 650mAh. With a 3S 550mAh, the full AUW (All-Up Weight) is available in round 150g.

Word: the Pavo20 Professional is just not designed to hold a GoPro or full-size HD digicam. In case you actually wish to add an exterior HD cam (e.g., Insta360 GO or Bare GoPro), you’ll must 3D print your personal mount—and preserve it mild. Extra weight will rapidly have an effect on each flight efficiency and battery life.

Accessibility and Maintanence

Accessing the DJI O4 Professional’s SD card and USB port is straightforward, because of the good design of the body and digicam cage.

To avoid wasting weight, BetaFPV changed the usual USB-C port on the flight controller with a smaller 4-pin JST connector. Meaning you’ll want to make use of the included USB adapter when connecting to Betaflight—a small trade-off for a lighter construct.

The drone’s development is de facto easy. The digicam cage is mounted to the drone’s physique utilizing solely 4 bolts. It’s simple to assemble or take aside, which is useful for fast repairs. The gentle mounting for the digicam appears to do a very good job of eliminating jello.

Upgrading from DJI O3 to O4 Professional

Already flying the Pavo20 Professional with DJI O3 and excited about upgrading?

Excellent news: You solely must buy the brand new digicam cage designed for the O4 Professional. No want to purchase an entire new drone! The O4 mounts with the identical four-screw configuration, and the adjustable digicam tilt permits you to fly with near-zero angle for cinematic-style pictures.

This makes the Pavo20 Professional platform extra modular, and an ideal long-term funding.

Flight Efficiency

By way of flight traits, the Pavo20 Professional with DJI O4 Professional flies nearly identically to the O3 and NightFire editions. Identical energy, responsiveness, dealing with, and management authority.

I examined it in average wind as properly (10–12 mph) and was impressed by how properly it dealt with. No noticeable jello even when flying aggressively, and it gives easy management for each informal cruising and precision cinematic actions.

Let’s be real looking, although—this isn’t a freestyle drone. It doesn’t have the facility or punch of an open-prop quad. However for low-speed, close-proximity cinematic flying, it’s supreme. The built-in prop safety additionally makes it safer to make use of round folks or in tight areas.

I get about 5 to six minutes of flight time on a 3S 550mAh LiHV battery, about 4 to five minutes on 450mAh and simply over 6 minutes on 650mah. Nevertheless, greater battery doesn’t appear to supply important longer flight time however makes it fly worse – 720mAh could be the most important pack I might use with the Pavo20 Professional.

The Pavo20 Professional isn’t significantly loud by cinewhoop requirements on account of its comparatively small dimension, nevertheless it’s nonetheless noisy sufficient that I wouldn’t advocate flying it indoors—until, in fact, you’re in search of a divorce 😀 If you would like one thing appropriate for indoor flying, it is best to stick to 1S tiny whoops. Take a look at my high suggestions right here: https://oscarliang.com/best-tiny-whoop/#Finest-75mm-Tiny-Whoops

Pavo20 Professional vs GEPRC Cinelog30 V3

In comparison with the GEPRC Cinelog30 V3 I lately reviewed, the Pavo20 Professional is:

• Smaller, making it extra appropriate for flying in tight areas.
• Lighter, however with much less energy and payload capability.
• Extra restricted in freestyle potential on account of its compact dimension.

The Cinelog30 V3, however:

• Extra environment friendly and gives longer flight time.
• Extra highly effective and may carry heavier payload (even full dimension GoPro).
• It’s due to this fact extra versatile in several flying types.

Nevertheless, each drones use light-weight plastic prop guards so as to preserve the burden down, which means neither is constructed to resist onerous crashes. But when I used to be going to crash I might reasonably decide the Pavo20 as a result of it’s lighter the impression shall be much less, and in contrast to the Cinelog, the digicam gained’t come out in crashes as a result of it’s onerous mounted which makes life simpler.

The right way to Setup

Earlier than the primary flight, I did the next:

• Put in the 2 O4 antennas within the antenna mount.
• Eliminated the protecting movie from the digicam lens.
• Plug in a smoke stopper, and join a battery and take a look at the drone and see if it powers up appropriately. You must hear the ESC/motor initiation beeps.
• Personally I’d keep away from putting in the LED strip to avoid wasting weight.

Firmware

• The flight controller (FC) board goal is BETAFPVF405, and it comes preloaded with Betaflight firmware model 4.5.0. For inventory CLI Diff, see right here.
• ESC Firmware: Bluejay, 0.19 (C-X-70)
• ELRS Receiver Firmware Goal: Generic ESP8285 2.4GHz RX, firmware 3.3.0

Betaflight Setup

Ultimate Ideas: Is It Value It?

In case you’re in search of the smallest cinewhoop with DJI O4 Professional assist, the Pavo20 Professional is my high suggestion.

You may get the Pavo20 Professional O4 version from the next distributors:

The design is strong because it has confirmed beforehand with the DJI O3. It carries the full-size O4 Air Unit with out feeling underpowered, and its small footprint makes it supreme for each indoor and tight out of doors environments. It’s not constructed for aggressive freestyle or crashing—however for easy, cinematic flights, it performs admirably.

If you have already got the O3 model, there’s not an enormous purpose to improve until you need the higher digicam efficiency of the O4 Professional. However when you’re deciding between the 2, go together with the O4 Professional model. It’s simply higher throughout.