Though the DJI Flip is a really new drone (as of this text’s writing), having been launched in January 2025, it has already obtained a number of firmware updates.
For these new to drones on the whole, firmware updates are crucial for drones. It is because they oftentimes implement efficiency enhancements, add new options, and deal with and repair bugs that in any other case hamper a superb flight expertise.
This text serves as a step-by-step information exhibiting how one can replace the DJI FlySafe Databases and firmware on the DJI Flip and DJI RC 2 distant controller.
Updating the Flip’s Firmware
For many who have been flying drones for some time, staying with a drone’s unique launch firmware was a standard follow, a follow we likewise adopted.
This was primarily as a result of the firmware updates then would oftentimes break a characteristic or trigger the drone to fly inconsistently. With newer drones, just like the Flip, updating the firmware is helpful.
As talked about, new options, tweaks, and fixes are added over time. These updates enhance the general person expertise.
DJI has been fairly dedicated to bettering the flight traits of their new line of drones, recurrently.
To replace the firmware in your DJI Flip, you’ll want your:
- DJI Flip and put in battery
- DJI distant controller (on this occasion the DJI RC 2)
Moreover, we propose that any time you run a firmware replace in your drone, have the Flip batteries and distant controller totally charged earlier than operating firmware updates.
The steps to replace the firmware in your Flip are as follows:
STEP 1: Earlier than turning on the DJI Flip, take away the gimbal and silicone digicam covers. This can be certain that when the Flip is turned on, the gimbal’s motion won’t be impeded and trigger errors.
STEP 2: After booting up your DJI RC 2, ensure you are linked to a WiFi community. To verify this, go into your settings display by double-sliding down the notification shade. In case your WiFi isn’t enabled, faucet the WiFi icon and look forward to a connection.
In case you are connecting to WiFi for the primary time, press and maintain the WiFi icon. This can carry you into the WiFi settings. Right here you’ll be able to connect with your most popular community.
STEP 3: Activate the Flip. Press, then press and maintain the facility button.
Word: In case you have not modified the “energy on when unfolded choices” within the DJI Fly app, ignore this step.
STEP 4: From inside the Digicam View display, press the again button, which can take you to the Flip house display.
Right here you will notice that there’s a firmware replace out there. Select Replace.
Throughout the replace course of, the lights on the Flip will flash. The DJI RC 2 may additionally reboot itself. You may be alerted when the replace is full.
Word: Oftentimes, the Flip might not restart itself after the Replace is full. You could have to manually energy it on afterward to start flying.
Manually Checking for Firmware Updates
In case you have not been prompted robotically that there’s a new firmware out there, you’ll be able to manually verify for updates, by doing the next:
With the DJI RC 2 turned on and linked to your WiFi community, whereas on the DJI Fly house display, merely go to Profile > Settings > Firmware Replace > Examine for Firmware Updates.
After the DJI RC 2 checks for the replace, if there may be none, you’ll obtain a message saying “Your firmware is updated”.
If there’s a new firmware replace, you’ll be alerted and can have the choice to run the replace.
Updating the FlySafe Database
Firstly, what’s FlySafe information?
Straight from DJI: “FlySafe information is designed to assist pilots higher perceive flight dangers, make knowledgeable choices, and mitigate security dangers by figuring out restricted and prohibited geographic areas. DJI gives automated updates to such information based mostly on native rules and inner threat evaluation. The completeness, accuracy, and effectiveness of the info are usually not assured, and such information ought to be used for reference solely.”
Like with firmware updates, updating the FlySafe Database is a very simple course of.
To replace the Flip’s FlySafe Databases:
STEP 1: Earlier than turning on the DJI Flip, take away the gimbal and silicone digicam covers. This can be certain that when the Flip is turned on, the gimbal’s motion won’t be impeded and trigger errors.
STEP 2: After booting up your DJI RC 2, ensure you are linked to a WiFi community. To verify this, go into your settings display by double-sliding down the notification shade. In case your WiFi isn’t enabled, faucet the WiFi icon and look forward to a connection.
In case you are connecting to WiFi for the primary time, press and maintain the WiFi icon. This can carry you into the WiFi settings. Right here you’ll be able to connect with your most popular community.
STEP 3: Activate the Flip. Press, then press and maintain the facility button.
Word: In case you have not modified the “energy on when unfolded choices” within the DJI Fly app, ignore this step.
STEP 4: From inside the Digicam View display, press the again button, which can take you to the Flip house display.
STEP 5: If there’s a FlySafe Database Replace out there, it’ll present on the DJI Fly homescreen.
Press Replace and the FlySafe Database will proceed to replace.
The method solely takes a minute or two and shouldn’t restart your DJI Flip.
